The absolute most essential thing for a woodworker will be always to keep its tools in a excellent condition. The high-quality wood router can carry out a good deal of functions, including trimming and cutting or shaping material. This highly effective tool can provide you different advantages and uses from different endeavors. Non-functional or non-performing router can also cause frustration and a few troubles. There Are a Number of reasons your wood appliance isn’t functioning correctly like broken piece, wood or belt dust complications electricity distribution, or power issues. You are able to solve almost all of these without calling out a repair technician. In This Report, we will write about most frequent issues and their own solutions. To be able to discover an instant remedy, you must have some knowledge. To make you work process smoother and faster follow the below instructions.

1. Tolerance Problems :
In case your timber router shattered at the exact middle of an essential endeavor, you need to understand that how to repair it fast without calling for the service. Tolerance problem can occur at any time, which is unpredicted. Nevertheless, you’re able to prevent this sort of dilemma.

How to do that?

Solution:
Choosing the high-quality wood router is the best solution for this. Whenever you purchase the router, it should be of a well renowned brand. May be you have to pay a little more amount but you will be secured for the longer time. High cost will ensure you with better performance and long term durability.

2. Power Supply :
Power supply problem is the most common wood router issue which is the first thing comes out in the mind to check when your machine isn’t working. First remove its power connection and test the socket one for the right power delivery from your wood working router. Use any other appliance to check whether the socket is working properly.

If it works properly then this means there is no problem with supply.

Solution:
Check fuse and plug with the screwdriver. If there is a damage, you should get the replacement for it and try to use the device again. Also, if you have a battery based router, check connections and remove power source. Test the battery with a use a voltmeter and if it is necessary to replace with the new one. So, before moving on the other possible issue area make sure to verify other source of power with you wood working router.

3. Electrical Motor :
Electrical engine of your wood router could be one of the common problems.

Solution:
When your motor wears out with running span of time, replacement of the belt is the next thing you need to do. To do it, follow the instructions carefully. Lubrication can also be the problem than can prevent your router engine to start.

Solution:
To avoid this problem, we need to add some oil to the motor at the right place that is marked on the wood working router. Once it is done, give a try to start the router again.

4.  Slipping Bit:
There are ample of examples where router bit causes a problem. Continuous slipping in the chuck in the middle of the working process is noticeable point. You will realize that the bit stops, while the chucks still turn.

Solution:
If this problem occurs, turn off the machine and tighten up the chuck. If it doesn’t works, check does its key have been stripped or not. It can also lead to be the reason for a loose chuck.

5. Broken Bit :
When the bit is broken, it can harm your body or damage your wood creature or also cause a serious problem if it hits your eyes.

Solution:
Buying a high-quality router bit is the best thing you should to do to avoid this issue. For example, make a purchase form a renowned brand also be sure that you have installed it correctly, to avoid some additional problems. The hindrance occurs when the bit is not fitted properly; it will stop or break in the middle of the working process. Always wear the protective gear while working with the wood machine.

6. Bit Depth :
You can set the bit depth with the gauge provided on its side. However, the sawdust pile up the chuck that force the bits higher after some period. It goes into the gap of the router’s engine and causes friction which will heat up the router, thus lead to abrasion. The duration of the router will be affected, and can cause a problem with adjustment of the required height when you are working.

Solution:
Compressed air is the best solution. It will eradicate the wood chips or sawdust. Break the compacted sawdust with screwdriver, and then blow it out.Cleaning on regular basis is the best practice to avoid this issue.

7. Inconsistent or Unstable Bit Speed :
Make sure to check out the router belts if you are experiencing bit speed inconsistency. In the most common situation, you may find they are cracked in the older wood working routers especially.

Solution:
Replacement is the best option. Read the points mentioned by the manufacturer in the booklet for the suitable replacement time. If the same problem occurs again then call a certified repairman.

Conclusion :
These are the most common wood working router issues that you might have faced and solve by yourself. Follow the above instructions carefully so you can fix any of these problems. But, when you are facing some technical fault with the router, these tips won’t help you.

If this happens, the best thing to do is call a repair technician.